Menu
Menu
Aerolite Stonework & Granite
Aerolite Stonework & Granite are 20mm thick natural stone panels reinforced with a fibreglass backing giving the panel robust strength and versatility. While Granite is a through coloured stone, the Aerolite Stone panel compromises of a 15mm thick natural granite backer with a 5mm natural stone veneer face.
Key Features
- System weight 54kg/m2
- CWCT tested at Vinci UK, achieving CAT B in impact resistance
- Max rail centres tested 600mm horizontally
- A2 fire rating (A2, S1, d0 by Warrington Exova)
- Bomb blast tested
- Panel sizes up to 1500mm x 600mm (larger available on request)
- Large range of granite, limestones & sandstones available in various finishes (such as polished, honed, sandblasted, flamed)
- High quality mechanically supported pre-formed corners – 2,3,4 sided panels.
Fixing Methods
Kerf (primary) – The kerf fixing is a gravity based fixing method. Aerolite panels arrive at site with a 3mm wide x 13mm deep channel grooved into the top and bottom edges, the channels are retained mechanically with our TI Tracking horizontal rail carrier system.
The TI tracking system compromises of horizontal carrier rails, an EPDM anti rattle gasket and divider clip designed to keep uniform vertical joints across the building. The TI Tracking is set out according to the panel module heights on site before any panels are delivered to site. The larger the panel height the more cost effective the system is.
Undercut Anchor (secondary) – This is used to support soffit panels interfacing with the kerf system & for portrait layout panels where rail centres need to be extended greater than 600mm.
Play Video
Projects
Swatches
All granites, limestones and sandstones are sourced globally from our network of suppliers and quarries, in colours, tones and surfaces finishes of choice.
